The Montréal Métro

By Yi -
Per readers' request, we are taking a look at the Montreal Metro operated by the Société de transport de Montréal (STM) this week.  I was fortunate to have experienced the system twice to connect between the downtown Coach Canada terminal and Gare Centrale at Bonaventure for the Amtrak Adirondack in 2008.  However, the distinct feature of the metro trains in Montreal is very easy to spot.  The train bodies are narrower than the Toronto subway trains (8 ft 2.4 in vs. 10 ft 4 in) and they run on rubber wheels!


Canadian Vickers MR-63, the original metro train in Montreal

The Montreal metro began operation on 14 October 1966.  It was inspired by Paris metro where trains serving some of lines also used rubber wheels.  The metro trains draw electricity from the guide bars beside the rails.  The horizontally placed wheelsroll against the guide bars to guide the trains.  The trains also have conventional flanged steel wheels on standard gauge (4 ft 8.5 in) rails to guide the trains through switches where there are gaps between guide bars to provide clearance to the trains.  The rubber wheels and guide wheels enabled the trains to be able to go around bends faster than conventional trains with only flanged steel wheels.  In regular service, the Montreal metro trains often reach a top speed of 45 mph.   Unlike the TTC subway, the entire Montreal metro system is underground.


Montreal metro tracks and switch

There are currently 2 types of trains used in the Montreal metro system, the Canadian Vickers MR-63 from 1966 (one of the oldest metro trains in North America still in service) and the Bombardier MR-73 from 1976.

If there are no other requests, I will talk about one of my favourite locomotives next week.  It is elegant and beautiful (some people may have completely opposite views, which is fine), fast and powerful, and the roar of its FDL engine is music to my ears.  It is the P42DC Genesis diesel-electric locomotive designed by General Electric and Krupp Verkehrstechnik (Germany) for passenger service (the model number already gave half of the information away if you remember what I posted last week).

Comments

Bernard said…
i'm so exited with locomotive. do you think that old locomotive can give their best performance? what is your opinion about train accident?
Apr 12, 2011, 9:43:00 AM
Train of the Week said…
Um... I'm not quite sure what you mean by giving their best performance, but I think if designed and tested properly, any locomotive will do.

I don't really have a take on train accidents at the moment, it certainly doesn't affect my decision on what mode of transportation to choose if rail is an option though.
Apr 15, 2011, 1:50:00 AM
Anonymous said…
That's a great post on Rail Transportation In Montreal . Thanks for sharing it.
Oct 30, 2013, 10:53:00 AM
Post a Comment

Popular posts from this blog

Briefly on the AAR Coupler Part 2

By -
Image
Last week, we've identified the Janney coupler and briefly looked at its elegant design. This week, let's, again, very briefly, look at the different types of Janney coupler that are widely used today. I will only talk about the head of the coupler, and ignore anything that the general public may need to trespass onto railroad property and get in a unsafe situation in order to have a good look at. As far as coupler heads are concerned, there are 3 types in used today. Type E, F, and H. Types E and F are used on freight, and H used on passenger equipment. Since the withdrawal of passenger service in North America by private railroads, the Type H standard is no longer maintained by the Association of American Railroads, a trade group formed of major freight railroads, but is under the control of the APTA, the American Public Transportation Association. Now let me introduce another term, slack. Slack is an allowed gap between two coupled up couplers. In other words, when most ...
Read more

Amtrak NPCU

By -
Image
The NPCU or Non-powered Control Units are control cars used by Amtrak that are modified from surplus EMD F40PH locomotives. A control car is a generic term for a non-powered railroad vehicle that can control operation of a train from the end opposite to the position of the locomotive. They can be used with diesel or electric motive power, allowing push-pull operation without the use of an additional locomotive. Control cars first appeared in the USA and France in 1960s. Trains operating with a locomotive at one end and a control car at the other do not require the locomotive to run around to the opposite end of the train when reversing direction. In the United States, most control cars are modified from retired locomotives by removing tractive equipment and adding side baggage doors and have been used on several passenger railroads. The control cars are connected through the consist of the train by standard AAR 27-wire multiple unit jumper cables. The NPCUs at Amtrak are a...
Read more

SD70ACu

By Yi -
Image
After the post on the shiny rebuilt GE road power, it's only fair to have a look into what Progress Rail has to offer on their side of the table. I'm using the company's recently-changed, formal name of course. For those who are not up-to-date on the current state of North American railroading affairs, Progress Rail is the company (owned by Caterpillar) that purchased EMD a few years ago. The SD90MAC was arguably the biggest gong show in EMD's recent memory. It happened at a time when they were comfortably resting on their laurels, unaware the fateful changes that were about to occur in the locomotive market in the not-so-distant future (they got beaten badly by GE). What was supposed to be one of the most remarkable locomotives whose presence is to grace the mainlines in modern history, turned out to be an utter disaster (I'll redirect further readings to Wikipedia). As a result, today, the number of SD90s still in operation on a Class 1 Railroad is, if not id...
Read more