China Railways HXD3

By -
The HXD3 is a 6-axle AC electric locomotive designed by CNR Dalian (China) and Tōshiba (Japan) for fast freight services in the People's Republic of China. It is technologically based on the cape gauge (1,067 mm or 3 ft 6 in) Tōshiba EH500 locomotive used by the Japan Freight Railway Company (JRF). The majority of HXD3 locomotives are built in China with core components (e.g. bogies, inverters) provided by Tōshiba. In the initial batch, 4 units were built in Japan by Tōshiba and parts for 12 units were shipped to China from Japan for final assembly. According to requirement set by the China Ministry of Railways, a single unit of HXD3 is able to maintain a speed of 120 km/h (75 mph) while handling a 5,000 tonne train. Production of the HXD3 began in 2006 and to date 1,040 units were ordered.


Just like other modern AC electric locomotives, the HXD3 is regenerative breaking capable. It has a total output of 7,200 kW (9,660 hp). With a maximum of 25 tonne (31 tonne for ES44AC) axle load, the HXD3 is able to provide a maximum of 570 kN (881 kN for ES44AC) starting tractive effort and 400 kN (740 kN for ES44AC) continuous tractive effort. To revise what these terms and numbers mean, please refer to my blog entry on the GE ES44AC.

Comments

Dinesh said…
Powerful 7200kW locomotives. Any problems in traction motors and converters from such high torque?
Apr 5, 2011, 11:49:00 AM
Train of the Week said…
Good question... I haven't found any published information about the reliability of these units, maybe there are but they just aren't in English?

However the traction motors themselves are quite standard, since these are 6-axle units and the Eurosprinter (4-axle, 6,400 kW) series from Siemens have been using more powerful traction motors since 1996.
Apr 7, 2011, 8:47:00 PM
Post a Comment

Popular posts from this blog

Briefly on the AAR Coupler Part 2

By -
Image
Last week, we've identified the Janney coupler and briefly looked at its elegant design. This week, let's, again, very briefly, look at the different types of Janney coupler that are widely used today. I will only talk about the head of the coupler, and ignore anything that the general public may need to trespass onto railroad property and get in a unsafe situation in order to have a good look at. As far as coupler heads are concerned, there are 3 types in used today. Type E, F, and H. Types E and F are used on freight, and H used on passenger equipment. Since the withdrawal of passenger service in North America by private railroads, the Type H standard is no longer maintained by the Association of American Railroads, a trade group formed of major freight railroads, but is under the control of the APTA, the American Public Transportation Association. Now let me introduce another term, slack. Slack is an allowed gap between two coupled up couplers. In other words, when most
Read more

Amtrak NPCU

By -
Image
The NPCU or Non-powered Control Units are control cars used by Amtrak that are modified from surplus EMD F40PH locomotives. A control car is a generic term for a non-powered railroad vehicle that can control operation of a train from the end opposite to the position of the locomotive. They can be used with diesel or electric motive power, allowing push-pull operation without the use of an additional locomotive. Control cars first appeared in the USA and France in 1960s. Trains operating with a locomotive at one end and a control car at the other do not require the locomotive to run around to the opposite end of the train when reversing direction. In the United States, most control cars are modified from retired locomotives by removing tractive equipment and adding side baggage doors and have been used on several passenger railroads. The control cars are connected through the consist of the train by standard AAR 27-wire multiple unit jumper cables. The NPCUs at Amtrak are a
Read more

Bombardier IORE

By Yi -
Image
For the readers who missed the posts in the past two weeks, we talked about the 110 mph General Electric diesel-electric locomotive P42DC Genesis (link here ) and once the flagship transcontinental passenger train of the Canadian Pacific Railway The Canadian (link here ). Let's take a break from passenger equipments and look at a very powerful freight locomotive this week.  The Bombardier IORE is a 12-axle twin-section electric locomotive designed exclusively for LKAB (Luossavaara-Kiirunavaara Aktiebolag), a Swedish mining company, to haul heavy (8,000 metric tonnes) iron ore trains (hence the name IORE) at 60 km/h (37 mph) in extreme Nordic weather conditions of northern Sweden and Norway.  It was first commissioned in Year 2000.  The IORE, or TRAXX H80AC, is an AC-propulsion locomotive that belongs in the TRAXX family of Bombardier locomotives.  The top speed of the IORE is 80 km/h (50 mph). The IORE uses 12 electric motors to power its axles (i.e. one motor per axle), t
Read more