British Rail Class 222

By -
The East Midland Trains Class 222 Meridian Diesel Electric Multiple Unit was the first main line service I had been on during my trip in England this year. Boarded at the beautiful London St Pancras International, the service took me to Sheffield, 160 some miles to the north in just over 2 hours time. Due to the track condition of the Midland Main Line, the Class 222 was not developing her full potential to achieve her top speed of 125 mph, it was definitely a very comfy and relaxing ride (although in North American standards, the seats were very hard and small). More technical jargon about the Class 222 can be found on my post about the Class 220/221, as the 222 was an prettier and slightly evolved version of the 220 (lightweight non-tilt truck design). At her heart, Cummins QSK19 engines (1,159 cu. in. 6 cylinder) pumps out 750 horsepower under each car body. After some rearrangement by the Train Operating Companies over the years, the Class 222 now comes in 4, 5, or 7-car formations and are exclusively operated by East Midland Trains between London St Pancras and Sheffield, Nottingham, or Corby. The Class 222 was entered into service in 2003 by the TOC then Midland Mainline.

 

CrossCountry 220/221 (Left) and East Midland Trains 222 (Right) at Sheffield

Comments

Kali said…
They're not terribly popular for us UK folk; the seats are indeed small and cramped. The older High Speed Trains are usually better, although some of the TOCs ( like First GreatWestern ) are doing their best to make them as uncomfortable as possible.
Jul 23, 2012, 11:21:00 AM
Post a Comment

Popular posts from this blog

Briefly on the AAR Coupler Part 2

By -
Image
Last week, we've identified the Janney coupler and briefly looked at its elegant design. This week, let's, again, very briefly, look at the different types of Janney coupler that are widely used today. I will only talk about the head of the coupler, and ignore anything that the general public may need to trespass onto railroad property and get in a unsafe situation in order to have a good look at. As far as coupler heads are concerned, there are 3 types in used today. Type E, F, and H. Types E and F are used on freight, and H used on passenger equipment. Since the withdrawal of passenger service in North America by private railroads, the Type H standard is no longer maintained by the Association of American Railroads, a trade group formed of major freight railroads, but is under the control of the APTA, the American Public Transportation Association. Now let me introduce another term, slack. Slack is an allowed gap between two coupled up couplers. In other words, when most
Read more

Amtrak NPCU

By -
Image
The NPCU or Non-powered Control Units are control cars used by Amtrak that are modified from surplus EMD F40PH locomotives. A control car is a generic term for a non-powered railroad vehicle that can control operation of a train from the end opposite to the position of the locomotive. They can be used with diesel or electric motive power, allowing push-pull operation without the use of an additional locomotive. Control cars first appeared in the USA and France in 1960s. Trains operating with a locomotive at one end and a control car at the other do not require the locomotive to run around to the opposite end of the train when reversing direction. In the United States, most control cars are modified from retired locomotives by removing tractive equipment and adding side baggage doors and have been used on several passenger railroads. The control cars are connected through the consist of the train by standard AAR 27-wire multiple unit jumper cables. The NPCUs at Amtrak are a
Read more

Bombardier IORE

By Yi -
Image
For the readers who missed the posts in the past two weeks, we talked about the 110 mph General Electric diesel-electric locomotive P42DC Genesis (link here ) and once the flagship transcontinental passenger train of the Canadian Pacific Railway The Canadian (link here ). Let's take a break from passenger equipments and look at a very powerful freight locomotive this week.  The Bombardier IORE is a 12-axle twin-section electric locomotive designed exclusively for LKAB (Luossavaara-Kiirunavaara Aktiebolag), a Swedish mining company, to haul heavy (8,000 metric tonnes) iron ore trains (hence the name IORE) at 60 km/h (37 mph) in extreme Nordic weather conditions of northern Sweden and Norway.  It was first commissioned in Year 2000.  The IORE, or TRAXX H80AC, is an AC-propulsion locomotive that belongs in the TRAXX family of Bombardier locomotives.  The top speed of the IORE is 80 km/h (50 mph). The IORE uses 12 electric motors to power its axles (i.e. one motor per axle), t
Read more