The Jōban Line

By -
I think I'm gonna be somewhat of a romantic today and talk about a railroad mainline in Japan whose name has quite a poetic meaning. Well, the romantic part is really going to be somewhat cheesy but we'll see.

A commuter train on the Jōban Line
Route Map of the Jōban Line
The Jōban Line (常磐線, or jōban-sen) connects Tōkyō to the City of Iwanuma in the Miyagi Prefecture, in northeastern Japan. The line officially begins in Nippori, but most trains originate in Ueno, a major station in Tōkyō. The name Jōban comes from the former Provinces of Hitachi (常陸) and Iwaki (磐城, you have to look at the first character of the names of the two places, apparently when you put them together it's pronounced totally differently and somehow became jōban) which probably sit somewhere near the current Miyagi Prefecture. Interestingly, the name jōban can also literally mean an everlasting rock.

The line can trace its roots back to 1889, long before the former JNR, but has been ever expanding. In its current form, the Jōban Line is approximately 230 miles long and runs parallel to the Tōhoku Line (東北本線 or the Northeastern Mainline) and the Tōhoku Shinkansen (東北新幹線 or the Northeastern High Speed Line). It uses the usual 3 ft. 6 in. cape gage found on Japan's vast non-high speed railroad network and spans over two electrical systems (similar to Continental Europe, Japan has a mix of electrical supply systems to the catenary system, which requires trains to be multi-modal). Today, the Jōban Line is owned by the East Japan Railway Company.

What used to be a station after the devastating tsunami of 2011
Being a coastal railroad mainline through the Fukushima Prefecture, the Jōban Line is a victim of the major earthquake and tsunami in March 2011. Portions of the line in the affected areas have been washed out and remain out of service today. Plans to rebuild and relocate are in place and work has been commenced, but the complete reopening of the Jōban Line is not expected until 2017.

Comments

Andy in Germany said…
I must admit to being a little cynical about the rebuilding: the Shinkansen across the Fukushima Prefecture was rebuilt within weeks, but somehow this line isn't important enough. There's a strong feeling among people in Japan that this region has basically been abandoned by the government.
Aug 10, 2013, 2:58:00 AM
Post a Comment

Popular posts from this blog

Briefly on the AAR Coupler Part 2

By -
Image
Last week, we've identified the Janney coupler and briefly looked at its elegant design. This week, let's, again, very briefly, look at the different types of Janney coupler that are widely used today. I will only talk about the head of the coupler, and ignore anything that the general public may need to trespass onto railroad property and get in a unsafe situation in order to have a good look at. As far as coupler heads are concerned, there are 3 types in used today. Type E, F, and H. Types E and F are used on freight, and H used on passenger equipment. Since the withdrawal of passenger service in North America by private railroads, the Type H standard is no longer maintained by the Association of American Railroads, a trade group formed of major freight railroads, but is under the control of the APTA, the American Public Transportation Association. Now let me introduce another term, slack. Slack is an allowed gap between two coupled up couplers. In other words, when most
Read more

Amtrak NPCU

By -
Image
The NPCU or Non-powered Control Units are control cars used by Amtrak that are modified from surplus EMD F40PH locomotives. A control car is a generic term for a non-powered railroad vehicle that can control operation of a train from the end opposite to the position of the locomotive. They can be used with diesel or electric motive power, allowing push-pull operation without the use of an additional locomotive. Control cars first appeared in the USA and France in 1960s. Trains operating with a locomotive at one end and a control car at the other do not require the locomotive to run around to the opposite end of the train when reversing direction. In the United States, most control cars are modified from retired locomotives by removing tractive equipment and adding side baggage doors and have been used on several passenger railroads. The control cars are connected through the consist of the train by standard AAR 27-wire multiple unit jumper cables. The NPCUs at Amtrak are a
Read more

Bombardier IORE

By Yi -
Image
For the readers who missed the posts in the past two weeks, we talked about the 110 mph General Electric diesel-electric locomotive P42DC Genesis (link here ) and once the flagship transcontinental passenger train of the Canadian Pacific Railway The Canadian (link here ). Let's take a break from passenger equipments and look at a very powerful freight locomotive this week.  The Bombardier IORE is a 12-axle twin-section electric locomotive designed exclusively for LKAB (Luossavaara-Kiirunavaara Aktiebolag), a Swedish mining company, to haul heavy (8,000 metric tonnes) iron ore trains (hence the name IORE) at 60 km/h (37 mph) in extreme Nordic weather conditions of northern Sweden and Norway.  It was first commissioned in Year 2000.  The IORE, or TRAXX H80AC, is an AC-propulsion locomotive that belongs in the TRAXX family of Bombardier locomotives.  The top speed of the IORE is 80 km/h (50 mph). The IORE uses 12 electric motors to power its axles (i.e. one motor per axle), t
Read more